Obisidian vault auto-backup: 09-02-2026 10:31:52 on . 867 files edited

This commit is contained in:
Félix MARQUET
2026-02-09 10:31:52 +01:00
parent c89c76e041
commit 8b4130ba21
867 changed files with 7917 additions and 18 deletions

View File

@@ -242,19 +242,26 @@
},
"active": "e11a6a080eb83632",
"lastOpenFiles": [
"ISEN/Sécurité IOT/CIPA4/IoT.Firmware.Analysis.pdf",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT TP1.md",
"ISEN/Introduction a la cyber et a la cryptographie/CIPA 4/20011126_fips-197.pdf",
"ISEN/Introduction a la cyber et a la cryptographie/CIPA 4/Crypto Cours 2.md",
"ISEN/Sécurité IOT/CIPA4/Firmware/extractions/iotdev_firmware.bin.extracted/120200/squashfs_120200.sqsh",
"ISEN/Sécurité IOT/CIPA4/Firmware/extractions/iotdev_firmware.bin.extracted/120200",
"ISEN/Sécurité IOT/CIPA4/Firmware/extractions/iotdev_firmware.bin.extracted",
"ISEN/Sécurité IOT/CIPA4/Firmware/extractions",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT Cours 1.md",
"ISEN/Introduction a la cyber et a la cryptographie/CIPA 4/20250708_CRYPTO_slides.pdf",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated.tgz",
"ISEN/Sécurité IOT/CIPA4/Firmware/iotdev_firmware.bin",
"ISEN/Sécurité IOT/CIPA4/Firmware",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated.tgz",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated/mips32/rootfs.ext2",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated/mips32/start_device.sh.bak",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated/mips32/start_device.sh",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated/mips32/root.shadow",
"ISEN/Sécurité IOT/CIPA4/Firmware/emulated/mips32/vmlinux",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/root.passwd",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/run/utmp",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/default.hash",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/home/default/ss_mips",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/usr/html/logo-7.svg",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/usr/html/graph2.png",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root/usr/html/graph1.png",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root-0/usr/html/logo-7.svg",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root-0/usr/html/graph2.png",
"ISEN/Sécurité IOT/CIPA4/Firmware/_iotdev_firmware.bin.extracted/squashfs-root-0/usr/html/graph1.png",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT TP1.md",
"ISEN/Introduction a la cyber et a la cryptographie/CIPA 4/Crypto Cours 2.md",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT Cours 1.md",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT Cours 3.md",
"ISEN/Sécurité IOT/CIPA4/Sécurité IOT Cours 2.md",
"ISEN/Navigation de vehicule autonome/CIPA4/Navigation de véhicule autonome Cours 1.md",
@@ -282,12 +289,6 @@
"ISEN/English/A2/23 févr 2024.md",
"Pasted image 20251009192656.png",
"Pasted image 20250610091125.png",
"Pasted image 20240505210657.png",
"Pasted image 20240505210642.png",
"ISEN/Web/CIPA 4/TP/TP1/images/ISEN_Logo.png",
"src/Pasted image 20240130111505.png",
"src/Pasted image 20240123120819.png",
"src/Pasted image 20240123120807.png",
"ISEN/Réseau/A2/TP Ansible et docker.canvas",
"ISEN/BDD/CIR2/TD2.canvas",
"ISEN/Modelec/NB point.canvas",

View File

@@ -0,0 +1,8 @@
# <file system> <mount pt> <type> <options> <dump> <pass>
/dev/root / ext2 rw,noauto 0 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts defaults,gid=5,mode=620,ptmxmode=0666 0 0
tmpfs /dev/shm tmpfs mode=0777 0 0
tmpfs /tmp tmpfs mode=1777 0 0
tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
sysfs /sys sysfs defaults 0 0

View File

@@ -0,0 +1,28 @@
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
kmem:x:9:
wheel:x:10:root
cdrom:x:11:
dialout:x:18:
floppy:x:19:
video:x:28:
audio:x:29:
tape:x:32:
www-data:x:33:
operator:x:37:
utmp:x:43:
plugdev:x:46:
staff:x:50:
lock:x:54:
netdev:x:82:
users:x:100:
nogroup:x:65534:
sshd:x:1000:
default:x:1001:

View File

@@ -0,0 +1,27 @@
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
kmem:x:9:
wheel:x:10:root
cdrom:x:11:
dialout:x:18:
floppy:x:19:
video:x:28:
audio:x:29:
tape:x:32:
www-data:x:33:
operator:x:37:
utmp:x:43:
plugdev:x:46:
staff:x:50:
lock:x:54:
netdev:x:82:
users:x:100:
nogroup:x:65534:
sshd:x:1000:

View File

@@ -0,0 +1,2 @@
127.0.0.1 localhost
127.0.1.1 iotDevice

View File

@@ -0,0 +1,40 @@
#!/bin/sh
#
# Start logging
#
SYSLOGD_ARGS=-n
KLOGD_ARGS=-n
[ -r /etc/default/logging ] && . /etc/default/logging
start() {
printf "Starting logging: "
start-stop-daemon -b -S -q -m -p /var/run/syslogd.pid --exec /sbin/syslogd -- $SYSLOGD_ARGS
start-stop-daemon -b -S -q -m -p /var/run/klogd.pid --exec /sbin/klogd -- $KLOGD_ARGS
echo "OK"
}
stop() {
printf "Stopping logging: "
start-stop-daemon -K -q -p /var/run/syslogd.pid
start-stop-daemon -K -q -p /var/run/klogd.pid
echo "OK"
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
stop
start
;;
*)
echo "Usage: $0 {start|stop|restart}"
exit 1
esac
exit $?

View File

@@ -0,0 +1,51 @@
#! /bin/sh
#
# urandom This script saves the random seed between reboots.
# It is called from the boot, halt and reboot scripts.
#
# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
#
[ -c /dev/urandom ] || exit 0
#. /etc/default/rcS
case "$1" in
start|"")
# check for read only file system
if ! touch /etc/random-seed 2>/dev/null
then
echo "read-only file system detected...done"
exit
fi
if [ "$VERBOSE" != no ]
then
printf "Initializing random number generator... "
fi
# Load and then save 512 bytes,
# which is the size of the entropy pool
cat /etc/random-seed >/dev/urandom
rm -f /etc/random-seed
umask 077
dd if=/dev/urandom of=/etc/random-seed count=1 \
>/dev/null 2>&1 || echo "urandom start: failed."
umask 022
[ "$VERBOSE" != no ] && echo "done."
;;
stop)
if ! touch /etc/random-seed 2>/dev/null
then
exit
fi
# Carry a random seed from shut-down to start-up;
# see documentation in linux/drivers/char/random.c
[ "$VERBOSE" != no ] && printf "Saving random seed... "
umask 077
dd if=/dev/urandom of=/etc/random-seed count=1 \
>/dev/null 2>&1 || echo "urandom stop: failed."
[ "$VERBOSE" != no ] && echo "done."
;;
*)
echo "Usage: urandom {start|stop}" >&2
exit 1
;;
esac

View File

@@ -0,0 +1,30 @@
#!/bin/sh
#
# Start the network....
#
# Debian ifupdown needs the /run/network lock directory
mkdir -p /run/network
case "$1" in
start)
printf "Starting network: "
/sbin/ifup -a
[ $? = 0 ] && echo "OK" || echo "FAIL"
;;
stop)
printf "Stopping network: "
/sbin/ifdown -a
[ $? = 0 ] && echo "OK" || echo "FAIL"
;;
restart|reload)
"$0" stop
"$0" start
;;
*)
echo "Usage: $0 {start|stop|restart}"
exit 1
esac
exit $?

View File

@@ -0,0 +1,31 @@
#!/bin/sh
#
# Start/stop nginx
#
NGINX=/usr/sbin/nginx
PIDFILE=/var/run/nginx.pid
case "$1" in
start)
echo "Starting nginx..."
mkdir -p /var/log/nginx /var/tmp/nginx
start-stop-daemon -S -x "$NGINX" -p "$PIDFILE"
;;
stop)
echo "Stopping nginx..."
start-stop-daemon -K -x "$NGINX" -p "$PIDFILE" -o
;;
reload|force-reload)
echo "Reloading nginx configuration..."
"$NGINX" -s reload
;;
restart)
"$0" stop
sleep 1 # Prevent race condition: ensure nginx stops before start.
"$0" start
;;
*)
echo "Usage: $0 {start|stop|restart|reload|force-reload}"
exit 1
esac

View File

@@ -0,0 +1,47 @@
#!/bin/sh
#
# sshd Starts sshd.
#
# Make sure the ssh-keygen progam exists
[ -f /usr/bin/ssh-keygen ] || exit 0
umask 077
start() {
# Create any missing keys
/usr/bin/ssh-keygen -A
printf "Starting sshd: "
/usr/sbin/sshd
touch /var/lock/sshd
echo "OK"
}
stop() {
printf "Stopping sshd: "
killall sshd
rm -f /var/lock/sshd
echo "OK"
}
restart() {
stop
start
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
restart
;;
*)
echo "Usage: $0 {start|stop|restart}"
exit 1
esac
exit $?

View File

@@ -0,0 +1,27 @@
#!/bin/sh
# Stop all init scripts in /etc/init.d
# executing them in reversed numerical order.
#
for i in $(ls -r /etc/init.d/S??*) ;do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set stop
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i stop
;;
esac
done

View File

@@ -0,0 +1,27 @@
#!/bin/sh
# Start all init scripts in /etc/init.d
# executing them in numerical order.
#
for i in /etc/init.d/S??* ;do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done

View File

@@ -0,0 +1,35 @@
# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels. The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id == tty to run on, or empty for /dev/console
# runlevels == ignored
# action == one of sysinit, respawn, askfirst, wait, and once
# process == program to run
# Startup the system
::sysinit:/bin/mount -t proc proc /proc
::sysinit:/bin/mount -o remount,rw /
::sysinit:/bin/mkdir -p /dev/pts
::sysinit:/bin/mkdir -p /dev/shm
::sysinit:/bin/mount -a
::sysinit:/bin/hostname -F /etc/hostname
# now run any rc scripts
::sysinit:/etc/init.d/rcS
# Put a getty on the serial port
ttyS0::respawn:/sbin/getty -L ttyS0 0 vt100 # GENERIC_SERIAL
# Stuff to do for the 3-finger salute
#::ctrlaltdel:/sbin/reboot
# Stuff to do before rebooting
::shutdown:/etc/init.d/rcK
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r

View File

@@ -0,0 +1 @@
Cisco IoTSec - Simulated IoT Device

View File

@@ -0,0 +1,9 @@
/var/log/nginx/*log {
missingok
create 640 http log
sharedscripts
compress
postrotate
test ! -r /var/run/nginx.pid || kill -USR1 `cat /var/run/nginx.pid`
endscript
}

View File

@@ -0,0 +1 @@
../proc/self/mounts

View File

@@ -0,0 +1,21 @@
#!/bin/sh
# In case we have a slow-to-appear interface (e.g. eth-over-USB),
# and we need to configure it, wait until it appears, but not too
# long either. IF_WAIT_DELAY is in seconds.
if [ "${IF_WAIT_DELAY}" -a ! -e "/sys/class/net/${IFACE}" ]; then
printf "Waiting for interface %s to appear" "${IFACE}"
while [ ${IF_WAIT_DELAY} -gt 0 ]; do
if [ -e "/sys/class/net/${IFACE}" ]; then
printf "\n"
exit 0
fi
sleep 1
printf "."
: $((IF_WAIT_DELAY -= 1))
done
printf " timeout!\n"
exit 1
fi

View File

@@ -0,0 +1,17 @@
# interface file auto-generated by buildroot
auto lo
iface lo inet loopback
###auto eth0
###iface eth0 inet dhcp
### pre-up /etc/network/nfs_check
### wait-delay 15
auto eth0
iface eth0 inet static
address 20.0.0.2
netmask 255.255.255.0
network 20.0.0.0
broadcast 20.0.0.255
gateway 20.0.0.1

View File

@@ -0,0 +1,20 @@
#!/bin/sh
# This allows NFS booting to work while also being able to configure
# the network interface via DHCP when not NFS booting. Otherwise, a
# NFS booted system will likely hang during DHCP configuration.
# Attempting to configure the network interface used for NFS will
# initially bring that network down. Since the root filesystem is
# accessed over this network, the system hangs.
# This script is run by ifup and will attempt to detect if a NFS root
# mount uses the interface to be configured (IFACE), and if so does
# not configure it. This should allow the same build to be disk/flash
# booted or NFS booted.
nfsip=`sed -n '/^[^ ]*:.* \/ nfs.*[ ,]addr=\([0-9.]\+\).*/s//\1/p' /proc/mounts`
if [ -n "$nfsip" ] && ip route get to "$nfsip" | grep -q "dev $IFACE"; then
echo Skipping $IFACE, used for NFS from $nfsip
exit 1
fi

View File

@@ -0,0 +1,26 @@
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REQUEST_SCHEME $scheme;
fastcgi_param HTTPS $https if_not_empty;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

View File

@@ -0,0 +1,26 @@
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REQUEST_SCHEME $scheme;
fastcgi_param HTTPS $https if_not_empty;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

View File

@@ -0,0 +1,25 @@
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REQUEST_SCHEME $scheme;
fastcgi_param HTTPS $https if_not_empty;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

View File

@@ -0,0 +1,25 @@
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REQUEST_SCHEME $scheme;
fastcgi_param HTTPS $https if_not_empty;
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;

View File

@@ -0,0 +1,109 @@
# This map is not a full koi8-r <> utf8 map: it does not contain
# box-drawing and some other characters. Besides this map contains
# several koi8-u and Byelorussian letters which are not in koi8-r.
# If you need a full and standard map, use contrib/unicode2nginx/koi-utf
# map instead.
charset_map koi8-r utf-8 {
80 E282AC ; # euro
95 E280A2 ; # bullet
9A C2A0 ; # &nbsp;
9E C2B7 ; # &middot;
A3 D191 ; # small yo
A4 D194 ; # small Ukrainian ye
A6 D196 ; # small Ukrainian i
A7 D197 ; # small Ukrainian yi
AD D291 ; # small Ukrainian soft g
AE D19E ; # small Byelorussian short u
B0 C2B0 ; # &deg;
B3 D081 ; # capital YO
B4 D084 ; # capital Ukrainian YE
B6 D086 ; # capital Ukrainian I
B7 D087 ; # capital Ukrainian YI
B9 E28496 ; # numero sign
BD D290 ; # capital Ukrainian soft G
BE D18E ; # capital Byelorussian short U
BF C2A9 ; # (C)
C0 D18E ; # small yu
C1 D0B0 ; # small a
C2 D0B1 ; # small b
C3 D186 ; # small ts
C4 D0B4 ; # small d
C5 D0B5 ; # small ye
C6 D184 ; # small f
C7 D0B3 ; # small g
C8 D185 ; # small kh
C9 D0B8 ; # small i
CA D0B9 ; # small j
CB D0BA ; # small k
CC D0BB ; # small l
CD D0BC ; # small m
CE D0BD ; # small n
CF D0BE ; # small o
D0 D0BF ; # small p
D1 D18F ; # small ya
D2 D180 ; # small r
D3 D181 ; # small s
D4 D182 ; # small t
D5 D183 ; # small u
D6 D0B6 ; # small zh
D7 D0B2 ; # small v
D8 D18C ; # small soft sign
D9 D18B ; # small y
DA D0B7 ; # small z
DB D188 ; # small sh
DC D18D ; # small e
DD D189 ; # small shch
DE D187 ; # small ch
DF D18A ; # small hard sign
E0 D0AE ; # capital YU
E1 D090 ; # capital A
E2 D091 ; # capital B
E3 D0A6 ; # capital TS
E4 D094 ; # capital D
E5 D095 ; # capital YE
E6 D0A4 ; # capital F
E7 D093 ; # capital G
E8 D0A5 ; # capital KH
E9 D098 ; # capital I
EA D099 ; # capital J
EB D09A ; # capital K
EC D09B ; # capital L
ED D09C ; # capital M
EE D09D ; # capital N
EF D09E ; # capital O
F0 D09F ; # capital P
F1 D0AF ; # capital YA
F2 D0A0 ; # capital R
F3 D0A1 ; # capital S
F4 D0A2 ; # capital T
F5 D0A3 ; # capital U
F6 D096 ; # capital ZH
F7 D092 ; # capital V
F8 D0AC ; # capital soft sign
F9 D0AB ; # capital Y
FA D097 ; # capital Z
FB D0A8 ; # capital SH
FC D0AD ; # capital E
FD D0A9 ; # capital SHCH
FE D0A7 ; # capital CH
FF D0AA ; # capital hard sign
}

View File

@@ -0,0 +1,103 @@
charset_map koi8-r windows-1251 {
80 88 ; # euro
95 95 ; # bullet
9A A0 ; # &nbsp;
9E B7 ; # &middot;
A3 B8 ; # small yo
A4 BA ; # small Ukrainian ye
A6 B3 ; # small Ukrainian i
A7 BF ; # small Ukrainian yi
AD B4 ; # small Ukrainian soft g
AE A2 ; # small Byelorussian short u
B0 B0 ; # &deg;
B3 A8 ; # capital YO
B4 AA ; # capital Ukrainian YE
B6 B2 ; # capital Ukrainian I
B7 AF ; # capital Ukrainian YI
B9 B9 ; # numero sign
BD A5 ; # capital Ukrainian soft G
BE A1 ; # capital Byelorussian short U
BF A9 ; # (C)
C0 FE ; # small yu
C1 E0 ; # small a
C2 E1 ; # small b
C3 F6 ; # small ts
C4 E4 ; # small d
C5 E5 ; # small ye
C6 F4 ; # small f
C7 E3 ; # small g
C8 F5 ; # small kh
C9 E8 ; # small i
CA E9 ; # small j
CB EA ; # small k
CC EB ; # small l
CD EC ; # small m
CE ED ; # small n
CF EE ; # small o
D0 EF ; # small p
D1 FF ; # small ya
D2 F0 ; # small r
D3 F1 ; # small s
D4 F2 ; # small t
D5 F3 ; # small u
D6 E6 ; # small zh
D7 E2 ; # small v
D8 FC ; # small soft sign
D9 FB ; # small y
DA E7 ; # small z
DB F8 ; # small sh
DC FD ; # small e
DD F9 ; # small shch
DE F7 ; # small ch
DF FA ; # small hard sign
E0 DE ; # capital YU
E1 C0 ; # capital A
E2 C1 ; # capital B
E3 D6 ; # capital TS
E4 C4 ; # capital D
E5 C5 ; # capital YE
E6 D4 ; # capital F
E7 C3 ; # capital G
E8 D5 ; # capital KH
E9 C8 ; # capital I
EA C9 ; # capital J
EB CA ; # capital K
EC CB ; # capital L
ED CC ; # capital M
EE CD ; # capital N
EF CE ; # capital O
F0 CF ; # capital P
F1 DF ; # capital YA
F2 D0 ; # capital R
F3 D1 ; # capital S
F4 D2 ; # capital T
F5 D3 ; # capital U
F6 C6 ; # capital ZH
F7 C2 ; # capital V
F8 DC ; # capital soft sign
F9 DB ; # capital Y
FA C7 ; # capital Z
FB D8 ; # capital SH
FC DD ; # capital E
FD D9 ; # capital SHCH
FE D7 ; # capital CH
FF DA ; # capital hard sign
}

View File

@@ -0,0 +1,89 @@
types {
text/html html htm shtml;
text/css css;
text/xml xml;
image/gif gif;
image/jpeg jpeg jpg;
application/javascript js;
application/atom+xml atom;
application/rss+xml rss;
text/mathml mml;
text/plain txt;
text/vnd.sun.j2me.app-descriptor jad;
text/vnd.wap.wml wml;
text/x-component htc;
image/png png;
image/tiff tif tiff;
image/vnd.wap.wbmp wbmp;
image/x-icon ico;
image/x-jng jng;
image/x-ms-bmp bmp;
image/svg+xml svg svgz;
image/webp webp;
application/font-woff woff;
application/java-archive jar war ear;
application/json json;
application/mac-binhex40 hqx;
application/msword doc;
application/pdf pdf;
application/postscript ps eps ai;
application/rtf rtf;
application/vnd.apple.mpegurl m3u8;
application/vnd.ms-excel xls;
application/vnd.ms-fontobject eot;
application/vnd.ms-powerpoint ppt;
application/vnd.wap.wmlc wmlc;
application/vnd.google-earth.kml+xml kml;
application/vnd.google-earth.kmz kmz;
application/x-7z-compressed 7z;
application/x-cocoa cco;
application/x-java-archive-diff jardiff;
application/x-java-jnlp-file jnlp;
application/x-makeself run;
application/x-perl pl pm;
application/x-pilot prc pdb;
application/x-rar-compressed rar;
application/x-redhat-package-manager rpm;
application/x-sea sea;
application/x-shockwave-flash swf;
application/x-stuffit sit;
application/x-tcl tcl tk;
application/x-x509-ca-cert der pem crt;
application/x-xpinstall xpi;
application/xhtml+xml xhtml;
application/xspf+xml xspf;
application/zip zip;
application/octet-stream bin exe dll;
application/octet-stream deb;
application/octet-stream dmg;
application/octet-stream iso img;
application/octet-stream msi msp msm;
application/vnd.openxmlformats-officedocument.wordprocessingml.document docx;
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet xlsx;
application/vnd.openxmlformats-officedocument.presentationml.presentation pptx;
audio/midi mid midi kar;
audio/mpeg mp3;
audio/ogg ogg;
audio/x-m4a m4a;
audio/x-realaudio ra;
video/3gpp 3gpp 3gp;
video/mp2t ts;
video/mp4 mp4;
video/mpeg mpeg mpg;
video/quicktime mov;
video/webm webm;
video/x-flv flv;
video/x-m4v m4v;
video/x-mng mng;
video/x-ms-asf asx asf;
video/x-ms-wmv wmv;
video/x-msvideo avi;
}

Some files were not shown because too many files have changed in this diff Show More